The right fireplace size is about heat output (kW), not how wide the glass is. Here is a simple way to work out what your room needs, and which fireplaces can heat it.
The quick answer
A common rule of thumb is about 1 kW of heat for every 10 m² of floor area, for a room with standard 2.4 m ceilings and average insulation. So a 4 kW fireplace heats up to about 40 m². Allow more for high ceilings, poor insulation, open-plan spaces or colder areas.
Step 1: measure your room
Multiply the length by the width to get the floor area in square metres. If the room opens onto a kitchen, hallway or dining area with no door, include those spaces too, because the heat will spread into them.
Step 2: find your heat range
| Room | Floor area | Heat to aim for | Types that suit |
|---|---|---|---|
| Bedroom or study | up to 20 m² | up to 2 kW | Electric, small ethanol |
| Small living room | up to 35 m² | up to 3.5 kW | Hard-wired electric, ethanol |
| Living room | up to 60 m² | up to 6 kW | Gas, large ethanol, 6 kW hard-wired electric |
| Open-plan living | up to 100 m² | up to 10 kW | Gas, wood |
| Large home or whole house | over 100 m² | 10 kW + | Wood |
Step 3: pick a fireplace that heats your area
Electric: small rooms and top-up heat
Most electric fireplaces plug into a normal power point. Some can be hard-wired by an electrician for more heat. No flue or gas, and the flames can run without heat.
- Napoleon Entice 60: heats up to 16 m²
- Napoleon Astound 62: heats up to 19 m²
- ilektro 1250 Elite: heats up to 20 m² plugged in, or up to 40 m² hard-wired
- ilektro 1650 Elite: heats up to 20 m² plugged in, or up to 60 m² hard-wired
Ethanol: real flame, no flue
Because ethanol fireplaces are not flued, each model also has a minimum room volume and needs good ventilation, so check the model's room requirements.
- Decoflame Net Zero F2 insert: heats up to 51 m² (largest size)
- Decoflame LogicWood insert: heats up to 56 m² (largest size)
Gas: living rooms and open plan
Heat at the push of a button. Needs a gas supply, a flue and a licensed gasfitter.
- Quadro 800: heats up to 65 m²
- Vue 1250: heats up to 69 m²
- Vue 1410: heats up to 90 m²
- Alto: heats up to 108 m²
Wood: the most heat, for big spaces
Wood heaters give the most heat and keep working in a blackout. They need a flue, a hearth and an installer, and many councils require approval first.
- Euro Fireplaces Andorra: heats up to 240 m²
- Euro Fireplaces Falun: heats up to 240 m²
- Siena 750: heats up to 290 m²
- Hestia 1200 (inbuilt): heats up to 190 m²
Where the maker publishes a heating area we show theirs (the wood heaters above, except Hestia). The rest are worked out from the maker's heat output at 1 kW per 10 m². Your home may need more or less.
Bigger is not always better
A fireplace far too powerful for the room is often run on low, which is less comfortable and, for wood heaters, less efficient. Aim for the range that suits your space rather than the biggest model.
Things that change the answer
- Ceiling height: raked or high ceilings need more heat.
- Insulation and windows: older homes and large glass areas lose heat faster.
- Open plan: count every space the heat can flow into.
- Climate: the Blue Mountains or Southern Highlands need more than coastal Sydney.
Not sure what size you need?
Send us your room measurements, ceiling height and a photo, and we'll suggest fireplaces that suit.