Planning a fireplace beneath your television? Getting the proportions right creates a balanced feature wall, where the screen and the fireplace feel like part of the same design.
The quick answer
For a modern linear fireplace, a good starting point is a visible fireplace opening about the same width as your TV, or slightly wider. This is a styling guide, not an installation requirement.
Compare the actual widths
TV sizes are measured diagonally across the screen, so a 65-inch television is not 65 inches wide.
When comparing products, use the television's actual width and the fireplace's visible front opening. Check fireplace specifications carefully: the model name, glass width and overall installation dimensions can all describe different measurements.
The table below is a starting point for a contemporary linear fireplace.
| TV size | Approx. screen width* | Fireplace viewing width to consider |
|---|---|---|
| 55 inches | 1,220 mm | 1,250–1,500 mm |
| 65 inches | 1,440 mm | 1,500–1,650 mm |
| 75 inches | 1,660 mm | 1,700–1,900 mm |
| 85 inches | 1,880 mm | 1,900–2,100 mm |
*Screen widths are calculated for a standard 16:9 display. The TV's frame adds to its overall width. Fireplace ranges are styling suggestions, subject to available models and wall space.
Models that match each TV size
These fireplaces have a published viewing width inside the suggested range. Viewing widths are the manufacturer's figures.
- 55-inch TV: Napoleon Astound 50 (1,262 mm viewing width) or Napoleon Entice 60 (1,416 mm)
- 65-inch TV: Napoleon Astound 62 (1,567 mm)
- 75-inch TV: Napoleon Entice 72 (1,721 mm) or Napoleon Astound 74 (1,872 mm)
- 85-inch TV: ask us. Wider models such as the ilektro 2200 Elite may suit; we'll confirm the viewing width from the specification sheet.
Should the fireplace be wider than the TV?
A fireplace that extends slightly beyond each side of the television gives the feature wall a strong visual base.
Example proportions, drawn to scale. Not an installation drawing.
A narrower fireplace can also work, particularly when a wider mantel, stone surround or cabinetry helps balance the television above it. Traditional and freestanding fireplaces need a different design approach from wide linear models.
Stone and cabinetry count towards the overall proportions of the wall.
Consider the whole wall
Before choosing a model, think about:
- Wall width: leave space around the fireplace so the design feels comfortable.
- Viewing height: plan the layout so you can watch the TV comfortably from your seat.
- Surrounds and cabinetry: include their dimensions when judging the overall proportions.
- Heating needs: choose heat output to suit the room. Fireplace width alone does not determine how much heat it gives.
Try it before you build
Mark the outlines of the TV and the fireplace on the wall with painter's tape. Step back to your seat and see how it feels before committing.
Check installation requirements
The gap between the fireplace and the TV must follow the requirements for the specific products. Electric, gas and wood fireplaces each have different heat and clearance considerations.
Check both manufacturers' instructions, and confirm the layout with your installer before building the wall or mounting the television.
Need help choosing the right size?
Send us your TV model or width, wall dimensions and a photo of the space, and we'll help you find sizes and designs that suit your feature wall.