Decoflame Net Zero F2 Ethanol Fireplace Insert
In stock, ready to ship
Estimated delivery: 5–10 business days.
Questions before you buy? Call us on 02 8355 0185.
Overview
The F2 is Decoflame’s entry-level automatic bioethanol burner, made in Denmark. It drops into an opening in a wall, bench or joinery and gives a long line of real flame, with no flue, chimney or gas line. It plugs into a power point and runs from the remote control or the panel on the burner.
Why choose the F2
- Two flame levels. Set from the remote or the LCD panel on the burner.
- Lights at the press of a button. Automatic ignition, with flames in about three minutes.
- Easy to fill. The external fuel pump is included, clicks onto the burner and stops by itself when the tank is full.
- Safety built in. Automatic emergency shut-off, fuel level monitoring, spill detection and a CO₂ sensor.
- Long burn time. Up to 20.5 hours from a full tank, depending on the flame level.
- No flue, chimney or gas connection. It needs an earthed power point and bioethanol fuel.
- Clean burning. No smoke, soot or ash.
- 2 year warranty. Up to 7 years when you buy an extended warranty.
Which size?
| Size | 520 mm | 720 mm | 1120 mm |
|---|---|---|---|
| Flame width | 400 mm | 600 mm | 1000 mm |
| Heat output | 2.4 kW | 3.7 kW | 5.1 kW |
| Fuel tank | 3.5 L | 4.8 L | 7.6 L |
| Smallest room it suits | 51 m³ | 77 m³ | 140 m³ |
Dimensions, wall cut-out sizes and weights are in the Specifications tab.
Colour options
Standard is matt black. Choose Custom colour for a white, RAL colour, brass, copper or gunmetal top plate. Contact us before you order a custom colour so we can confirm the finish and price with Decoflame.
What is included
- F2 burner with built-in fuel tank, in matt black
- Tempered glass screen
- Remote control
- External fuel pump
- Installation and user manual
Before you buy
- For indoor use only.
- It must be built into non-combustible material such as brick, concrete, steel or fire-rated board. The datasheet for each size is under Downloads, ready to hand to your builder.
- Do not place logs, pebbles or stones on the burner.
- Decoflame designs its fires to add warmth and atmosphere alongside your main heating, not to replace it.
- Not sure which size suits your room? Contact us and we will help you choose.
Specifications
Flame width: 400 mm (520 mm), 600 mm (720 mm), 1000 mm (1120 mm)
Fuel: bioethanol, 96.5 to 97.5%
Power: earthed 240 V, 10 amp power point
Controls: remote control and LCD panel on the burner
Safety: automatic emergency shut-off, fuel level monitoring, spill detection, CO₂ sensor
Materials: stainless steel and powder-coated aluminium, black finish
Glass: tempered clear glass
Made in Denmark
Installation & Downloads
Flue requirements
No flue or chimney required.
Clearance requirements
Build into non-combustible material only. The recess must be closed off above, below and at the sides. Where there is no steel plate, heat shield or casing above the burner, the opening must be at least 500 mm high.
FAQs
Does it need a flue or chimney?
No. Decoflame bioethanol fires do not need a flue, a chimney or a gas connection.
The room does need to be big enough. Where Decoflame gives a minimum room size, it is in the Specifications tab. Decoflame also advises letting in fresh air while the fire is running, for example by opening a window for 5 to 10 minutes or leaving a door to the next room open.
Does it need power?
Yes. It has an electronic burner, so it needs an earthed power point. Decoflame specifies a 240 V, 10 amp power point. The power runs the ignition, the controls and the safety sensors. The flame itself burns bioethanol.
Have a licensed electrician fit the power point before the fireplace goes in.
What fuel does it use, and how long does a tank last?
It burns liquid bioethanol at 96.5 to 97.5% strength, with nothing added. Do not use gel fuel or scented fuel.
The built-in tank holds 3.5 L (520 mm), 4.8 L (720 mm) or 7.6 L (1120 mm). A full tank burns for up to 20.5 hours, depending on the flame level you choose. On the highest flame level, allow about 8 to 10 hours.
Will it heat my room?
It gives off real heat, and the heat output is in the Specifications tab. Decoflame designs its fires to add warmth and atmosphere alongside your main heating, not to replace it.
What does my builder need to know?
The F2 is for indoor use and must be built into non-combustible material such as concrete, brick, steel or fire-rated board. Each size needs a cut-out 250 mm high and 200 mm deep, and 505, 705 or 1105 mm wide. The recess must be closed off above, below and at the sides.
An earthed power point goes inside the recess at the bottom right. Where there is no steel plate, heat shield or casing above the burner, the opening must be at least 500 mm high.
The datasheet for each size is under Downloads on this page. Give it to your builder before the opening is made, and have a licensed electrician fit the power point.
Can I put a TV above it?
Decoflame does not recommend putting a TV, artwork or anything heat-sensitive directly above the fire, because warm air rises. If you do, Decoflame’s guide is at least 800 mm between the fire opening and the TV. That can be reduced when the TV is recessed or there is a shelf between them to deflect the heat. The exact distances are in the manual or datasheet under Downloads.
What is included, and what is not?
Included: the F2 burner with its built-in fuel tank, a tempered glass screen, the remote control, the external fuel pump and the manual.
Not included: the wall, bench or surround it is built into, and the fuel.
What is the warranty?
It comes with a 2 year warranty. You can extend this to up to 7 years by buying an extended warranty. Ask us for details when you order.
How long does delivery take?
We confirm stock and delivery time with Decoflame when you order. If you are working to a build date, contact us before you buy and we will check for you.