Gas fireplaces: what to know before you buy

Paul Agnew Designs Vue 1410 peninsula gas fireplace

Gas fireplaces give you a real flame and real heat at the push of a button. Here's what to understand before you choose one.

Do gas fireplaces give off real heat?

Yes. Gas fireplaces burn natural gas or LPG to produce a real flame and heat. How much heat depends on the model's rated output and how it is installed. Glass-fronted models are generally designed for heating, while some open or decorative designs are mainly about the look of the flame. Check the manufacturer's heat output for the model you are considering.

Natural gas or LPG?

Gas fireplaces are set up for a specific gas type. Confirm whether your home has a natural gas connection or uses LPG bottles before ordering, and make sure the model you choose is supplied for that gas. Converting between gas types, where possible, must be done by a licensed gasfitter using the manufacturer's approved parts.

Who can install a gas fireplace?

In Australia, gas appliances must be installed and connected by a licensed gasfitter, in line with the manufacturer's installation instructions and the relevant Australian standards. Your installer will also confirm the gas supply, pipe size and location are suitable.

Do gas fireplaces need a flue?

Most built-in gas fireplaces need a flue to take combustion products outside. The type of flue, its route and its terminal position depend on the model and your home. Allow for flue components and installation when you are budgeting, and check the manufacturer's flueing options early, before walls and cavities are finished.

What size fireplace do I need?

Think about the room you want to heat, how open it is to other areas, ceiling height and insulation. A larger firebox does not always mean more heat, so compare the rated heat output as well as the visual size. If you are unsure, send us your room details and we can help you narrow it down.

Single-sided, corner, tunnel or peninsula?

Gas fireplaces come in different glass configurations. A single-sided fireplace faces one way. A corner fireplace shows the flame on the front and one side. A tunnel or see-through fireplace can be viewed from two rooms, and a peninsula or three-sided design is open on three sides. The configuration affects framing, clearances and where the fireplace can sit in the room.

What about clearances and framing?

Every built-in gas fireplace has minimum clearances to combustible materials, mantels and the surrounding wall. Follow the manufacturer's dimensions and framing requirements, and confirm them with your builder and gasfitter before construction.

How are gas fireplaces controlled?

Controls vary by model. Many offer remote control, adjustable flame height and electronic ignition, and some include thermostat or app control. Check which features are included and which are optional extras.

Do gas fireplaces need servicing?

Yes. Regular servicing by a licensed gasfitter helps keep a gas fireplace running safely and efficiently. Follow the manufacturer's recommended service interval and keep a record of servicing for warranty purposes.

Ready to look?

Still have a question? Call us on 02 8355 0185, email sales@fireplacesolutionsaustralia.com.au or send us a message.