Decoflame F3 ethanol burner set in a grey stone bench under timber shelves

Decoflame Net Zero F3 Ethanol Fireplace Insert

620 mm / Standard
$7,995.00
Skip to product information
Decoflame F3 ethanol burner set in a grey stone bench under timber shelves

Decoflame Net Zero F3 Ethanol Fireplace Insert

$7,995.00
Heats up to Suits rooms from 51 m³ (730 mm), 64 m³ (930 mm) or 89 m³ (1130 mm)
Ethanol
Inbuilt
Depends on the surround it is built into
2 years. Up to 7 years when an extended warranty is purchased

In stock, ready to ship

Estimated delivery: 5–10 business days.

Size
Colour
Extended warranty Optional
What each plan covers

Silver Care

  • Extends the standard warranty to a total of 5 years
  • Replacement parts only (labour is not included)
  • Phone and email technical support
  • Annual virtual safety check (burner, electronics, fuel compliance)
  • Discounted labour rates for out-of-warranty service

Platinum Care

  • Extends the standard warranty to a total of 7 years
  • Replacement parts and labour
  • Priority service booking
  • Annual safety check (virtual as standard, on-site where required)
  • Software and firmware support (where applicable)
  • Loan unit priority (subject to availability)

Gold Care

  • Extends the standard warranty to a total of 7 years
  • Replacement parts and labour (fully inclusive)
  • Priority customer support (front of queue)
  • Free annual safety check, virtual or on-site depending on product and location
  • Preventative maintenance review
  • White-glove escalation handling
  • Preferential scheduling during peak periods

After you buy, you register your plan with Decoflame. All Extended Care plans must be registered and approved by Ignition Works Pty Ltd T/As Decoflame. Terms and conditions

Request a Quote

Decoflame F3 ethanol burner set in a grey stone bench under timber shelves

Decoflame Net Zero F3 Ethanol Fireplace Insert

$7,995.00

Preferred contact method
Installation required

Questions before you buy? Call us on 02 8355 0185.

Overview

The F3 is an automatic bioethanol burner from Decoflame, made in Denmark. It drops into an opening in a wall, bench or joinery and gives a long line of real flame, with no flue, chimney or gas line. It plugs into a power point and runs from the remote control or the panel on the burner.

Why choose the F3

  • Three flame levels. Set from the remote or the panel on the burner. A timer can switch it off for you.
  • Lights at the press of a button. Automatic ignition, with flames in about three minutes.
  • Easy to fill. The electronic filling pump is included and stops by itself when the tank is full.
  • Safety built in. Sensors watch temperature, fuel level and spills, and the burner shuts itself down if something is wrong.
  • Long burn time. Up to 20.5 hours from a full tank, depending on the flame level.
  • No flue, chimney or gas connection. It needs an earthed power point and bioethanol fuel.
  • Clean burning. No smoke, soot or ash.
  • 2 year warranty. Up to 7 years when you buy an extended warranty.

Which size?

Size 620 mm 720 mm 920 mm 1120 mm
Flame width 400 mm 500 mm 700 mm 900 mm
Heat output 2.6 kW 3.2 kW 4.3 kW 5.7 kW
Fuel tank 3.8 L 4 L 5.8 L 7.2 L
Smallest room it suits 51 m³ 64 m³ 89 m³ 115 m³

Dimensions and weights are in the Specifications tab.

Colour options

Standard is matt black. Choose Custom colour for a white, RAL colour, brass, copper or gunmetal top plate. Contact us before you order a custom colour so we can confirm the finish and price with Decoflame.

What is included

  • F3 burner with built-in fuel tank, in matt black
  • Tempered glass screen with holders
  • Remote control
  • Electronic filling pump
  • Installation and user manual

Before you buy

  • For indoor use only.
  • It must be built into non-combustible material such as brick, concrete or fire-rated board. The installation manual is under Downloads, ready to hand to your builder.
  • Do not place logs, pebbles or stones on the burner.
  • Decoflame designs its fires to add warmth and atmosphere alongside your main heating, not to replace it.
  • Not sure which size suits your room? Contact us and we will help you choose.

Specifications

Fuel type
Ethanol
Installation type
Inbuilt
Viewing style
Depends on the surround it is built into
Heating area
Suits rooms from 51 m³ (730 mm), 64 m³ (930 mm) or 89 m³ (1130 mm)
Dimensions
Top plate 620, 720, 920 or 1120 mm long × 215 mm wide. The burner sits 160 mm deep in the recess
Heat output
2.6 kW (620 mm), 3.2 kW (720 mm), 4.3 kW (920 mm), 5.7 kW (1120 mm)
Burn time
Up to 20.5 hours, depending on flame level
Fuel consumption
Depends on the flame level. See burn time
Flue requirements
No flue or chimney required.
Clearance requirements
Build into non-combustible material only. Keep curtains and furniture at least 1 m away. The wall above the fire gets warm (up to 60°C): use non-combustible material for at least 300 mm above the opening. In brick or masonry with no steel plate or casing above the burner, the opening must be at least 500 mm high. Under a timber ceiling, keep at least 1 m between the top of the fireplace and the ceiling.
Indoor / outdoor suitability
Indoor only
Warranty
2 years. Up to 7 years when an extended warranty is purchased
Weight
17.5 kg (620 mm), 19.5 kg (720 mm), 22 kg (920 mm), 26 kg (1120 mm)
Burner
F3 electronic burner with automatic ignition and three flame levels
Fuel capacity
3.8 L (620 mm), 4 L (720 mm), 5.8 L (920 mm), 7.2 L (1120 mm)
Minimum room size
51 m³ (620 mm), 64 m³ (720 mm), 89 m³ (920 mm), 115 m³ (1120 mm)
Additional specifications
Flame width: 400 mm (620 mm), 500 mm (720 mm), 700 mm (920 mm), 900 mm (1120 mm)
Fuel: bioethanol, 96.5 to 97.5%
Power: earthed 240 V, 10 amp power point
Controls: remote control and panel on the burner
Safety: temperature, fuel level and spill sensors with automatic shut-off
Glass: tempered, 6 mm thick, 70 mm high
Finish: black powder coat, other finishes on request
Made in Denmark

Installation & Downloads

The F3 is built into a wall, bench or joinery made from non-combustible material. It does not need a flue, a chimney or a gas connection.

  • Wall: brick, concrete or fire-rated board. The opening must be closed off above, below and at the sides so no draught can run through the wall.
  • Power: an earthed 240 V, 10 amp power point inside the opening, below the burner.
  • Above the fire: non-combustible material for at least 300 mm. In brick or masonry with no steel plate or casing, the opening must be at least 500 mm high.
  • Around it: keep curtains and furniture at least 1 m away.
  • Where: indoor use only.

These points come from Decoflame’s installation manual, which is under Downloads below with the recess drawings. Give it to your builder before the opening is made.

Flue requirements

No flue or chimney required.

Clearance requirements

Build into non-combustible material only. Keep curtains and furniture at least 1 m away. The wall above the fire gets warm (up to 60°C): use non-combustible material for at least 300 mm above the opening. In brick or masonry with no steel plate or casing above the burner, the opening must be at least 500 mm high. Under a timber ceiling, keep at least 1 m between the top of the fireplace and the ceiling.

FAQs

Does it need a flue or chimney?

No. Decoflame bioethanol fires do not need a flue, a chimney or a gas connection.

The room does need to be big enough. Where Decoflame gives a minimum room size, it is in the Specifications tab. Decoflame also advises letting in fresh air while the fire is running, for example by opening a window for 5 to 10 minutes or leaving a door to the next room open.

Does it need power?

Yes. It has an electronic burner, so it needs an earthed power point. Decoflame specifies a 240 V, 10 amp power point. The power runs the ignition, the controls and the safety sensors. The flame itself burns bioethanol.

Have a licensed electrician fit the power point before the fireplace goes in.

What fuel does it use, and how long does a tank last?

It burns liquid bioethanol at 96.5 to 97.5% strength, with nothing added. Do not use gel fuel or scented fuel.

The built-in tank holds 3.8 L (620 mm), 4 L (720 mm), 5.8 L (920 mm) or 7.2 L (1120 mm). A full tank burns for up to 20.5 hours, depending on the flame level you choose. On the highest flame level, allow about 7 to 8 hours.

Will it heat my room?

It gives off real heat, and the heat output is in the Specifications tab. Decoflame designs its fires to add warmth and atmosphere alongside your main heating, not to replace it.

What does my builder need to know?

It is for indoor use and must be built into non-combustible material such as brick, concrete or fire-rated board. The opening must be closed off above, below and at the sides so no draught can run through the wall, and the supports under the burner must be level.

An earthed power point goes inside the opening, below the burner. Keep curtains and furniture at least 1 m away, and use non-combustible material for at least 300 mm above the opening. In brick or masonry with no steel plate or casing above the burner, the opening needs to be at least 500 mm high.

The installation manual under Downloads has the recess sizes and drawings. Give it to your builder before the opening is made, and have a licensed electrician fit the power point.

Can I put a TV above it?

Decoflame does not recommend putting a TV, artwork or anything heat-sensitive directly above the fire, because warm air rises. If you do, Decoflame’s guide is at least 800 mm between the fire opening and the TV. That can be reduced when the TV is recessed or there is a shelf between them to deflect the heat. The exact distances are in the manual or datasheet under Downloads.

What is included, and what is not?

Included: the F3 burner with its built-in fuel tank, a tempered glass screen with holders, the remote control, the electronic filling pump and the manual.

Not included: the wall, bench or surround it is built into, and the fuel.

What is the warranty?

It comes with a 2 year warranty. You can extend this to up to 7 years by buying an extended warranty. Ask us for details when you order.

How long does delivery take?

We confirm stock and delivery time with Decoflame when you order. If you are working to a build date, contact us before you buy and we will check for you.

Reviews

Related and comparable fireplaces