Euro Fireplaces Milano Cooktop wood heater in burgundy enamel

Euro Fireplaces Milano Cooktop Wood Heater

Burgundy
$2,499.00
Skip to product information
Euro Fireplaces Milano Cooktop wood heater in burgundy enamel

Euro Fireplaces Milano Cooktop Wood Heater

$2,499.00
Heats up to 140 m²
Wood
Freestanding
Single sided
5 years on the firebox. Linings and seals 3 months
64% (Australian test). 79% by the European test

In stock, ready to ship

Estimated delivery: 5–10 business days.

Finish
Flue kit Required for installation

Not sure which kit suits your home? Ask us or your installer before you order.

Request a Quote

Euro Fireplaces Milano Cooktop wood heater in burgundy enamel

Euro Fireplaces Milano Cooktop Wood Heater

$2,499.00

Preferred contact method
Installation required

Questions before you buy? Call us on 02 8355 0185.

Overview

The Milano is a small wood heater with a cooktop on top and a splash back behind it. It is a best seller for Euro Fireplaces in Europe and Australia, and heats an area of up to 140 m² despite its size.

Why choose the Milano Cooktop

  • Cook on it. The standard Milano has a small cooktop, enough for a kettle or a pot, with a splash back supplied.
  • Small footprint. At 376 mm wide and 356 mm deep it fits where a full-size heater will not.
  • Easy to clean. A riddle grate shakes the ash into a large removable ash tray, which the supplier says needs emptying about once a week.
  • No fan, no power. A double skin draws cool air in at the sides, warms it and sends it back out the top, so heat spreads through the house without a noisy fan.
  • Simple controls. Separate primary and secondary air controls set the burn.

Size and specifications

Heats Up to 140 m²
Efficiency 64% (Australian test), 79% (European test)
Emissions 1.4 g/kg
Wood use About 1.8 kg an hour
Log length Up to 25 cm
Size 376 mm wide × 890 mm high × 356 mm deep
Weight 70 kg
Flue outlet Rear, 6 inch
Ember retention 5 hours or more
Finish Burgundy enamel, stainless steel or black

Before you buy

  • The price is for the heater. It needs a flue kit: choose one when you add the heater to your cart, or have your installer supply it. The hearth and installation are quoted separately.
  • It needs at least 4 m of flue from the top of the heater, fitted by a licensed installer. Some states also need a certificate of compliance for the installation.
  • Burn seasoned hardwood only, with a moisture content under 25%.
  • The flue leaves from the rear of this model. Ask us for the clearances and hearth size before you plan where it will go.

Specifications

Fuel type
Wood
Installation type
Freestanding
Viewing style
Single sided
Heating area
140 m²
Dimensions
376 mm wide × 890 mm high × 356 mm deep
Efficiency
64% (Australian test). 79% by the European test
Burn time
Embers hold for 5 hours or more (supplier figure)
Fuel consumption
About 1.8 kg of wood an hour
Flue requirements
Rear flue outlet, 6 inch. At least 4 m of flue above the heater.
Clearance requirements
Clearances and hearth size depend on the installation. Ask us for the supplier installation notes before you plan the position.
Indoor / outdoor suitability
Indoor
Warranty
5 years on the firebox. Linings and seals 3 months
Weight
70 kg
Additional specifications
Emissions: 1.4 g/kg
Log length: up to 25 cm
Ember retention: 5 hours or more
Riddle grate and removable ash tray
Cooktop with splash back
Heat bank: not available on this model
Made by Thorma
Certificate of compliance number in the supplier catalogue: ASFT21C005

Installation & Downloads

This is a freestanding wood heater. It stands on a hearth and connects to a flue that runs straight up through the ceiling.

  • Flue: rear outlet with a T piece, 6 inch flue, and at least 4 m of flue above the heater.
  • Cooktop: the cooking plate and splash back are fitted on site.
  • Hearth and clearances: follow the installer notes supplied with the heater.
  • Installer: a licensed installer must fit the heater. Some states need a certificate of compliance.

The heater must always be transported upright.

Flue requirements

Rear flue outlet, 6 inch. At least 4 m of flue above the heater.

Clearance requirements

Clearances and hearth size depend on the installation. Ask us for the supplier installation notes before you plan the position.

FAQs

Can I cook on it?

Yes. The Milano Cooktop has a small cooktop on top, with a splash back behind it.

Does it need a flue?

Yes. The flue connects to the heater and runs straight up through the ceiling. Allow at least 4 m of flue above the heater. A licensed installer must fit it.

Does it need power or a fan?

No. It heats by natural convection: cool air is drawn into a double skin at the sides, warmed, and released from the top. There is no fan and nothing to plug in.

What wood should I burn?

Seasoned hardwood only. The moisture content should be under 25%, and 12 to 20% is best. Smaller logs burn cleaner, longer and hotter than large ones. Never burn treated or painted timber, driftwood or building offcuts.

Should I shut it down to burn overnight?

Euro Fireplaces advises against it. Shutting a heater down overnight makes a cold, smouldering fire with high emissions and creosote in the flue. These heaters light quickly, and a heat bank or stone cladding keeps giving off warmth after the fire has gone out.

Who can install it?

A licensed installer. The warranty only applies when the heater is installed to the Euro Fireplaces guidelines by a qualified installer, and some states need a certificate of compliance for the installation.

What is the warranty?

Euro Fireplaces covers the firebox for 5 years from the date of purchase. Linings and seals are covered for 3 months, and the glass until the first burn. It applies to the original buyer when the heater is installed by a qualified installer and run to the instructions with seasoned, untreated wood.

How often should the flue be cleaned?

Have the flue cleaned professionally once a year, ideally just before winter. Damage from a flue fire or a blocked flue is not covered by the warranty.

Reviews

Related and comparable fireplaces