Euro Fireplaces Buller Insert Wood Heater
In stock, ready to ship
Estimated delivery: 5–10 business days.
Questions before you buy? Call us on 02 8355 0185.
Overview
The Buller Insert builds one of Euro Fireplaces’ most powerful wood heaters into the wall. It has the wide, landscape window of the freestanding Buller, and the surround can be finished in a wide range of materials.
Why choose the Buller Insert
- Clean burning. Tested at 0.6 g/kg of emissions and 63% efficiency.
- Wide landscape window. It takes logs up to 45 cm and gives a broad view of the fire.
- No fan, no power. A double skin draws cool air in at the sides, warms it and sends it back out the top, so heat spreads through the house without a noisy fan.
- Fresh air from outside. A 100 mm outlet can bring combustion air from outside.
Size and specifications
| Heats | Up to 280 m² |
|---|---|
| Heat output | Up to 9.6 kW (maximum average) |
| Efficiency | 63% (Australian test), 76% (European test) |
| Emissions | 0.6 g/kg |
| Wood use | About 2.1 kg an hour |
| Log length | Up to 45 cm |
| Size | 820 mm wide × 674 mm high × 507 mm deep |
| Weight | 158 kg |
| Body behind the face | 656 mm wide × 440 mm deep |
| Ember retention | 6 hours or more |
| Heat bank | Depends on the installation |
Before you buy
- The price is for the heater. It needs a flue kit: choose one when you add the heater to your cart, or have your installer supply it. The hot box, hearth and installation are quoted separately.
- It needs at least 4 m of flue above the heater, fitted by a licensed installer. Some states also need a certificate of compliance.
- Burn seasoned hardwood only, with a moisture content under 25%.
- Contact us for the full installation details before the wall is built.
Specifications
Log length: up to 45 cm
Ember retention: 6 hours or more
Body behind the face: 656 mm wide × 440 mm deep
Outside air connection: optional, 100 mm
Removable ash tray
Made by Thorma
Certificate of compliance: AHHA25-369, valid to 20 June 2030
Installation & Downloads
Flue requirements
6 inch flue. At least 4 m of flue above the heater.
Clearance requirements
A hot box is built around the heater, with at least 150 mm of clearance from the heater to the hot box material. The specification sheet under Downloads shows the minimum hearth.
FAQs
Can it go into an existing fireplace?
The Falun Insert can be installed into an existing open fireplace or built into a new wall. Euro Fireplaces recommends the Buller Insert for a new build or renovation. Either way a heatproof hot box is built around the heater, with at least 150 mm of clearance between the heater and the hot box material.
Does it need a flue?
Yes. The flue connects to the heater and runs straight up through the ceiling. Allow at least 4 m of flue above the heater. A licensed installer must fit it.
Does it need power or a fan?
No. It heats by natural convection: cool air is drawn into a double skin at the sides, warmed, and released from the top. There is no fan and nothing to plug in.
What wood should I burn?
Seasoned hardwood only. The moisture content should be under 25%, and 12 to 20% is best. Smaller logs burn cleaner, longer and hotter than large ones. Never burn treated or painted timber, driftwood or building offcuts.
Who can install it?
A licensed installer. The warranty only applies when the heater is installed to the Euro Fireplaces guidelines by a qualified installer, and some states need a certificate of compliance for the installation.
What is the warranty?
Euro Fireplaces covers the firebox for 5 years from the date of purchase. Linings and seals are covered for 3 months, and the glass until the first burn. It applies to the original buyer when the heater is installed by a qualified installer and run to the instructions with seasoned, untreated wood.