Euro Fireplaces Buller wood heater on a box base with log storage

Euro Fireplaces Buller Box Wood Heater

$5,999.00
Skip to product information
Euro Fireplaces Buller wood heater on a box base with log storage

Euro Fireplaces Buller Box Wood Heater

$5,999.00
Heats up to 280 m²
Wood
Freestanding
Single sided
5 years on the firebox. Linings and seals 3 months
61% (Australian test). 76% by the European test

In stock, ready to ship

Estimated delivery: 5–10 business days.

Flue kit Required for installation

Not sure which kit suits your home? Ask us or your installer before you order.

Optional extras

Ticked extras are added to your cart along with this product.

Request a Quote

Euro Fireplaces Buller wood heater on a box base with log storage

Euro Fireplaces Buller Box Wood Heater

$5,999.00

Preferred contact method
Installation required

Questions before you buy? Call us on 02 8355 0185.

Overview

The Buller was designed for the Australian market, inspired by the traditional wide wood stove, with a low profile and a broad window. This version sits on a box base with an open space underneath for firewood.

Why choose the Buller Box

  • Box base with log storage. The firebox sits on a 400 mm high base with open storage, 930 mm high overall.
  • Big firebox. It takes logs up to 45 cm and heats up to 280 m², one of the largest capacities in the Euro Fireplaces range.
  • Wide window. The low, wide glass gives a broad view of the fire and plenty of radiant heat.
  • No fan, no power. A double skin draws cool air in at the sides, warms it and sends it back out the top, so heat spreads through the house without a noisy fan.
  • Fresh air from outside. A 100 mm intake at the rear can be connected to outside air, so the fire does not use the warm air in the room. This suits well sealed, energy efficient homes.
  • Optional heat bank. A 10 kg heat bank for the sides and back lifts ember retention from 7 hours or more to 8.

Size and specifications

Heats Up to 280 m²
Heat output Up to 10.6 kW (maximum average)
Efficiency 61% (Australian test), 76% (European test)
Emissions 1.4 g/kg
Wood use About 2.7 kg an hour
Log length Up to 45 cm
Size 770 mm wide × 930 mm high × 527 mm deep
Weight 158 kg
Base Box base with open log storage
Ember retention 7 hours or more, or 8 with the optional heat bank

Before you buy

  • The price is for the heater. It needs a flue kit: choose one when you add the heater to your cart, or have your installer supply it. The hearth and installation are quoted separately.
  • It needs at least 4 m of flue from the top of the heater, fitted by a licensed installer. Some states also need a certificate of compliance for the installation.
  • Burn seasoned hardwood only, with a moisture content under 25%.
  • The tested clearances and the minimum hearth size are on the specification sheet under Downloads.

Specifications

Fuel type
Wood
Installation type
Freestanding
Viewing style
Single sided
Heating area
280 m²
Dimensions
770 mm wide × 930 mm high × 527 mm deep
Heat output
Up to 10.6 kW (maximum average heat output, AHHA certificate)
Efficiency
61% (Australian test). 76% by the European test
Burn time
Embers hold for 7 hours or more (supplier figure)
Fuel consumption
About 2.7 kg of wood an hour
Flue requirements
Top flue outlet, 6 inch. At least 4 m of flue above the heater.
Clearance requirements
The tested clearances and the minimum hearth size are on the specification sheet under Downloads. Your installer must follow them.
Indoor / outdoor suitability
Indoor
Warranty
5 years on the firebox. Linings and seals 3 months
Weight
158 kg
Additional specifications
Emissions: 1.4 g/kg
Log length: up to 45 cm
Ember retention: 7 hours or more; 8 or more with the optional heat bank
Heat bank: optional, 10 kg
Outside air connection: optional, 100 mm
Removable ash tray
Colour: black
Made by Thorma
Certificate of compliance: AHHA25-370, valid to 20 June 2030

Installation & Downloads

This is a freestanding wood heater. It stands on a hearth and connects to a flue that runs straight up through the ceiling.

  • Flue: 6 inch flue from the heater, with at least 4 m of flue above it. Allow one extra length for every pair of 45 degree bends.
  • Outside air: the 100 mm intake at the rear can be ducted through an outside wall or the floor. Where that is not possible, an insulated flue with an outside air connection can bring the air down the flue.
  • Hearth and clearances: follow the specification sheet for this model.
  • Installer: a licensed installer must fit the heater. Some states need a certificate of compliance.

The heater must always be transported upright.

Flue requirements

Top flue outlet, 6 inch. At least 4 m of flue above the heater.

Clearance requirements

The tested clearances and the minimum hearth size are on the specification sheet under Downloads. Your installer must follow them.

FAQs

Does it need a flue?

Yes. The flue connects to the heater and runs straight up through the ceiling. Allow at least 4 m of flue above the heater. A licensed installer must fit it.

Does it need power or a fan?

No. It heats by natural convection: cool air is drawn into a double skin at the sides, warmed, and released from the top. There is no fan and nothing to plug in.

Can it take its air from outside?

Yes. A 100 mm intake at the rear can be connected to outside air through a wall or the floor. The fire then uses outside air instead of the warm air in your room, which suits well sealed homes.

What is a heat bank?

A heat bank is extra heat-storing material, such as refractory concrete panels or magnesite bricks, fitted inside the heater. It soaks up heat while the fire burns and releases it for hours afterwards. It is an optional extra on many Euro Fireplaces heaters and built into some.

What wood should I burn?

Seasoned hardwood only. The moisture content should be under 25%, and 12 to 20% is best. Smaller logs burn cleaner, longer and hotter than large ones. Never burn treated or painted timber, driftwood or building offcuts.

Should I shut it down to burn overnight?

Euro Fireplaces advises against it. Shutting a heater down overnight makes a cold, smouldering fire with high emissions and creosote in the flue. These heaters light quickly, and a heat bank or stone cladding keeps giving off warmth after the fire has gone out.

Who can install it?

A licensed installer. The warranty only applies when the heater is installed to the Euro Fireplaces guidelines by a qualified installer, and some states need a certificate of compliance for the installation.

What is the warranty?

Euro Fireplaces covers the firebox for 5 years from the date of purchase. Linings and seals are covered for 3 months, and the glass until the first burn. It applies to the original buyer when the heater is installed by a qualified installer and run to the instructions with seasoned, untreated wood.

Reviews

Related and comparable fireplaces