Euro Fireplaces Alvesta steel wood heater with an open log store

Euro Fireplaces Alvesta Wood Heater

$4,499.00
Skip to product information
Euro Fireplaces Alvesta steel wood heater with an open log store

Euro Fireplaces Alvesta Wood Heater

$4,499.00
Heats up to 240 m²
Wood
Freestanding
Single sided
5 years on the firebox. Linings and seals 3 months
73% (Australian test). 82% by the European test

In stock, ready to ship

Estimated delivery: 5–10 business days.

Flue kit Required for installation

Not sure which kit suits your home? Ask us or your installer before you order.

Optional extras

Ticked extras are added to your cart along with this product.

Request a Quote

Euro Fireplaces Alvesta steel wood heater with an open log store

Euro Fireplaces Alvesta Wood Heater

$4,499.00

Preferred contact method
Installation required

Questions before you buy? Call us on 02 8355 0185.

Overview

The Alvesta is the smaller steel heater in the Falun group, with an open log store under the firebox. The all-steel body starts spreading heat within about 20 minutes of lighting, which the supplier says makes it a good fit for a holiday home.

Why choose the Alvesta

  • Quick to warm up. The steel body begins distributing heat within about 20 minutes of lighting.
  • Small footprint. It is 549 mm wide and 390 mm deep, with a log store in the base.
  • One slider. A single lever controls both the primary and secondary air, so it is simple to run.
  • No fan, no power. A double skin draws cool air in at the sides, warms it and sends it back out the top, so heat spreads through the house without a noisy fan.
  • Fresh air from outside. A 100 mm intake at the rear can be connected to outside air, so the fire does not use the warm air in the room. This suits well sealed, energy efficient homes.
  • Optional heat bank. A 10 kg heat bank can be added to hold warmth for longer.

Size and specifications

Heats Up to 240 m²
Heat output Up to 10.3 kW (maximum average)
Efficiency 73% (Australian test), 82% (European test)
Emissions 1.5 g/kg
Wood use About 1.9 kg an hour
Log length Up to 33 cm
Size 549 mm wide × 927 mm high × 390 mm deep
Weight 98 kg
Ember retention 5 hours or more, or 6 with the optional heat bank
Colour Black steel

Before you buy

  • The price is for the heater. It needs a flue kit: choose one when you add the heater to your cart, or have your installer supply it. The hearth and installation are quoted separately.
  • It needs at least 4 m of flue from the top of the heater, fitted by a licensed installer. Some states also need a certificate of compliance for the installation.
  • Burn seasoned hardwood only, with a moisture content under 25%.
  • The tested clearances and the minimum hearth size are on the specification sheet under Downloads.

Specifications

Fuel type
Wood
Installation type
Freestanding
Viewing style
Single sided
Heating area
240 m²
Dimensions
549 mm wide × 927 mm high × 390 mm deep
Heat output
Up to 10.3 kW (maximum average heat output, AHHA certificate)
Efficiency
73% (Australian test). 82% by the European test
Burn time
Embers hold for 5 hours or more (supplier figure)
Fuel consumption
About 1.9 kg of wood an hour
Flue requirements
Top flue outlet, 6 inch. At least 4 m of flue above the heater.
Clearance requirements
The tested clearances and the minimum hearth size are on the specification sheet under Downloads. Your installer must follow them.
Indoor / outdoor suitability
Indoor
Warranty
5 years on the firebox. Linings and seals 3 months
Weight
98 kg
Additional specifications
Emissions: 1.5 g/kg
Log length: up to 33 cm
Ember retention: 5 hours or more; 6 or more with the optional heat bank
Heat bank: optional, 10 kg
Outside air connection: optional, 100 mm at the rear
Removable ash tray
Colour: black steel
Made by Thorma
Certificate of compliance: AHHA25-373, valid to 20 June 2030

Installation & Downloads

This is a freestanding wood heater. It stands on a hearth and connects to a flue that runs straight up through the ceiling.

  • Flue: 6 inch flue from the heater, with at least 4 m of flue above it. Allow one extra length for every pair of 45 degree bends.
  • Outside air: the 100 mm intake at the rear can be ducted through an outside wall or the floor. Where that is not possible, an insulated flue with an outside air connection can bring the air down the flue.
  • Hearth and clearances: follow the specification sheet for this model.
  • Installer: a licensed installer must fit the heater. Some states need a certificate of compliance.

The heater must always be transported upright.

Flue requirements

Top flue outlet, 6 inch. At least 4 m of flue above the heater.

Clearance requirements

The tested clearances and the minimum hearth size are on the specification sheet under Downloads. Your installer must follow them.

FAQs

Does it need a flue?

Yes. The flue connects to the heater and runs straight up through the ceiling. Allow at least 4 m of flue above the heater. A licensed installer must fit it.

Does it need power or a fan?

No. It heats by natural convection: cool air is drawn into a double skin at the sides, warmed, and released from the top. There is no fan and nothing to plug in.

Can it take its air from outside?

Yes. A 100 mm intake at the rear can be connected to outside air through a wall or the floor. The fire then uses outside air instead of the warm air in your room, which suits well sealed homes.

What is a heat bank?

A heat bank is extra heat-storing material, such as refractory concrete panels or magnesite bricks, fitted inside the heater. It soaks up heat while the fire burns and releases it for hours afterwards. It is an optional extra on many Euro Fireplaces heaters and built into some.

What wood should I burn?

Seasoned hardwood only. The moisture content should be under 25%, and 12 to 20% is best. Smaller logs burn cleaner, longer and hotter than large ones. Never burn treated or painted timber, driftwood or building offcuts.

Should I shut it down to burn overnight?

Euro Fireplaces advises against it. Shutting a heater down overnight makes a cold, smouldering fire with high emissions and creosote in the flue. These heaters light quickly, and a heat bank or stone cladding keeps giving off warmth after the fire has gone out.

Who can install it?

A licensed installer. The warranty only applies when the heater is installed to the Euro Fireplaces guidelines by a qualified installer, and some states need a certificate of compliance for the installation.

What is the warranty?

Euro Fireplaces covers the firebox for 5 years from the date of purchase. Linings and seals are covered for 3 months, and the glass until the first burn. It applies to the original buyer when the heater is installed by a qualified installer and run to the instructions with seasoned, untreated wood.

Reviews

Related and comparable fireplaces